Service manual

EPSON Stylus Photo R1900/R2880/R2000 Revision E
Product Description Operation Buttons & Indicators (LEDs) 26
Confidential
Note *1: When two or more errors occur at the same time, the one with higher priority will be indicated.
*2: The cartridge LED corresponding to each ink cartridge lights.
*3: The all LEDs light for 0.2 seconds when a reset request is received.
*4: Stylus Photo R2880 only.
Note : --: No change
Flash: Repeats turning On and Off every 1.25 seconds.
Flash 2: Repeats On for 0.5 seconds, Off for 0.5 seconds,
On for 0.5 seconds, and Off for 1.0 second.
Flash 3: Repeats Off for 0.5 seconds, On for 0.5 seconds,
Off for 0.5 seconds, and On for 1.0 second.
Flash 4: Repeats On for 2.0 seconds and Off for 0.5 seconds.
Flash at high speed: Repeats turning On and Off every 0.5 seconds.
Flashes alternately 1:Same as the “Flash”
Flashes alternately 2: Repeats turning Off and On every 1.25 seconds.
Table 1-18. Indicators (LEDs) Function
Printer Status
Indicators (LEDs)
Pri-
ority*
1
Power Paper Ink
Power OFF
Flashes at
high speed
OFF OFF 1
Fatal error OFF
Flashes at
high speed
Flashes at
high speed
2
Maintenance request OFF
Flashes
alternately 1
Flashes
alternately 2
3
CDR guide error -- Flashes 2
Flashes at
high speed
4
Paper path error -- Flashes --
5Paper (CDR) jam -- Flashes --
Cover open error -- Flashes --
Multi-feed error -- ON --
6
No paper error -- ON --
Ink cartridge replacement is in progress Flashes -- -- 7
Ink sequence is in progress Flashes -- -- 8
CSIC error -- -- ON*
2
9
No ink cartridge error or ink-out error -- -- ON*
2
Ink Color error*
4
-- --
Flashes at
high speed*
2
10
Data processing/Printing from camera Flashes -- --
11
Connected to non-supported external
device
-- Flashes 2 Flashes 3
Connected to USB hub -- Flashes 4 Flashes
Ink level low -- -- Flashes*
2
12
Connected to camera
(with rubbing reduction)
Flashes 4 -- --
13Connected to camera
(without rubbing reduction)
Flashes 2 -- --
Power ON Flashes -- --
Reset request*
3
ON ON ON --