Installation manual

Valve Wiring for LPG
GND
Power Input
LPG - Solenoid hook-
up 12VDC & S1
(12 volts)
S1S2
When the Solenoid is de-energized you will see 12 volts on both Red or Black wires.
When it is energized you will see 12 volts on the middle wire and .7 volts on the end
wire.
Note: The 2 middle screws (of the solenoid terminal) will always have 12 volts unless
there is a blown fuse or the E-Stop switched is in the off position.