User`s guide

Printing on Special Media
3-17
13. Reinstall the manual feeder on the top of the printer.
14. Slide out the output tray extension. Then make sure the
edge of the rear paper support guide is beneath the
extension so the continuous paper doesn’t catch on it as it
ejects.
15. Follow the instructions in Chapters 1 or 2 as necessary to
send a print job. Be sure to select
Tractor Feeder as the
Paper Source option and then choose the correct
Paper
Size
. The continuous paper loads and printing begins
when the printer receives the print job.
Follow the steps in the next section to remove continuous paper
correctly.
rear paper support
guide
output tray extension
Note:
If you run out of
continuous paper while
printing, the Paper Out
S
and Pause lights come
on. Load more paper on
the tractor feeder and
press the Pause button to
continue printing.
media.fm5 Page 17 Friday, May 9, 1997 1:48 PM