User`s guide

B-1

You can use the EPSON Plot! program to open and scale HPGL

or HPGL/2 plotter files and then print them on your printer.

Follow the instructions in this Appendix to install the program

and print with

EPSON Plot! and your Windows printer driver.

You can install and use

EPSON Plot! on any system running

Windows 3.1, Windows 95, or Windows NT (3.51 or 4.0).

Make sure to connect the printer to that system and install the

printer software following the instructions in the Quick Setup

booklet before you begin.

Installing EPSON Plot!

Follow these steps to install EPSON Plot! on the system

connected to the printer:

1. Make sure Windows is running, but no applications are

open.

2. Insert the

EPSON Plot! Disk 1 diskette in a drive.

3. With Windows 3.1 or Windows NT 3.51 Program

Manager, open the File menu and click

Run.

With Windows 95 or Windows NT 4.0, click

Start, then

click

Run.

4. Type

A:\SETUP or B:\SETUP and click OK.

Using

EPSON Plot!

Note:

You can also install

EPSON Plot! from the

printer software

CD-ROM.

eplot.fm5 Page 1 Friday, May 9, 1997 2:14 PM