Service manual

EPSON Perfection 1250/1250 PHOTO Disassembly and Assembly
32
Figure 4-6. Upper Cover Removal - Disengage Hooks
Figure 4-7. View With Upper Cover Removed
4.2.4 Carriage Assembly Removal
Preparation:
"
Remove the document cover as described in Document Cover on
page 31.
"
Release the carriage as described in Carriage Lock Release on
page 30.
1. Remove one screw (CBB, M2.5x12), and then remove the driven pulley to
loosen the timing belt.
2. Remove the CR Shaft from the holder.
3. Remove the timing belt from the carriage assembly.
4. Disconnect the white ribbon cable from the main circuit board.
Figure 4-8. Carriage Assembly Removal (1)
Hooks
CBB (M2.5x12) screw
CR Shaft
Holder
Pulley