Service manual

EPSON Perfection 1250/1250 PHOTO Disassembly and Assembly

4.1.2 Screws

See the tables below if you’ve forgotten where to put a particular screw.

Screws are referred to by number throughout the disassembly instructions.

4.2 Disassembly Procedures

This section describes the disassembly and removal procedures for each

major component of the scanner.

4.2.1 Carriage Lock Release

1. Disconnect the power cable from the scanner.

2. Make sure the carriage lock at the rear of the scanner is in the released

position.

Figure 4-2. Carriage Lock Position

Table 4-2. Screw Name Abbreviations

Abbreviation Screw Name

CBP P-type cross-head binding screw

CBB B-type cross-head binding screw

Table 4-3. List of Screw Types

No. Specification Shape

1 CBP(M3x8)

2 CBB(M2.5x12)

Locked Position Released Position

C A U T I O N

Before relocking the carriage to transport the scanner,

make sure that the carriage is in the home position.