Service manual

5 Remove one screw (callout 2) from the back of the product.
2
Figure 5-13 Remove the rear panel and top-cover assembly (4 of 6; HP LJ 1020 printer shown)
6 The top-cover assembly and metal rear-panel are interlocked with plastic tabs. Plastic tabs also
secure the metal rear-panel at the bottom. Lift up the fuser cover at the top and pull it back slightly.
Lift the rear panel up and off the tabs on the bottom.
Figure 5-14 Remove the rear panel and top-cover assembly (5 of 6)
ENWW Covers 79