Service manual

4 Squeeze the two retaining tabs on the plastic door-link clip to release it from the hinge arm on the
print-cartridge door.
CAUTION Do not drop the clip into the gear assembly that is on the side of the printer.
Figure 5-11 Remove the rear panel and top-cover assembly (2 of 6)
Hint Reinsert the plastic door-link clip in the hinge arm or store it with the screws to prevent
losing it.
Figure 5-12 Remove the rear panel and top-cover assembly (3 of 6)
78 Chapter 5 Removal and replacement ENWW