Service manual

Copyright Information
© 2005 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation or translation
without prior written permission is prohibited
except as allowed under the copyright laws.
The information contained in this document
is subject to change without notice.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products
and services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
Part number Q5911-90945
Edition 1, 4/2005
Information regarding FCC Class B, Parts 15
and 68 requirements can be found in the user
guide.
NOTICE TO U.S. GOVERNMENT USERS:
RESTRICTED RIGHTS COMMERCIAL
COMPUTER SOFTWARE: “Use,
duplication, or disclosure by the Government
is subject to restrictions as set forth in
subparagraph (c) (1)(ii) of the Rights in
Technical Data Clause at DFARS
52.227-7013.”
Trademark Credits
Microsoft
®
and Windows
®
are U.S.
registered trademarks of the Microsoft
company.
Safety Information
WARNING!
Potential Shock Hazard
Always follow basic safety precautions when
using this product to reduce risk of injury from
fire or electric shock.
Read and understand all instructions in the
user guide.
Observe all warnings and instructions
marked on the product.
Use only a grounded electrical outlet when
connecting the HP LaserJet 1010 series
printer or HP LaserJet 1020 printer to a
power source. If you don’t know whether the
outlet is grounded, check with a qualified
electrician.
Do not touch the contacts on the end of any
of the sockets on the
HP LaserJet 1010 series printer or
HP LaserJet 1020 printer. Replace
damaged cords immediately.
Unplug this product from wall outlets before
cleaning or servicing.
Do not install or use this product near water
or when you are wet.
Install the product securely on a stable
surface.
Install the product in a protected location
where no one can step on or trip over the
power cord and the power cord will not be
damaged.
If the product does not operate normally, see
the online user guide.