Service manual

Engine control unit (ECU) assembly
1 Remove the following assemblies.
● Right-side cover. See
Right-side cover on page 75.
● Left-side cover. See
Left-side cover on page 77.
● Top-cover assembly. See
Rear panel and top-cover assembly on page 77.
● Front cover. See
Front cover on page 82.
2 Disconnect the flat flexible (ribbon) cable (callout 1) from the formatter, which is on the right side of
the product.
Figure 5-29 Remove the ECU assembly (1 of 6)
92 Chapter 5 Removal and replacement ENWW