User Manual
43 
 Reboot Device Setting Interface 
Press or , move inverse cursor to 10.Reboot Device , then 
press     and enter into test mode interface below: 
If needing to reboot the device, press   to submit and the device will reboot 
at once. 
4.5 remote communication and monitor 
With special communicate cable, user could monitor the status and modify the 
parameters. 
1-  MT50 display unit( need one standard twisted-net cable, model: 
CC-RS485-RS485-200U-MT) 
2-  Super parameter programmer, SPP-01(Use standard twisted net cable, 
model: CC-RS485-RS485-200U). 
One-key easily configure and apply to batch setting. 
Reboot Device 
No   Yes 










