User Manual

 Reboot Device Setting Interface

Press or , move inverse cursor to 10．Reboot Device , then

press and enter into test mode interface below:

If needing to reboot the device, press to submit and the device will reboot

at once.

4.5 remote communication and monitor

With special communicate cable, user could monitor the status and modify the

parameters.

1- MT50 display unit( need one standard twisted-net cable, model:

CC-RS485-RS485-200U-MT)

2- Super parameter programmer, SPP-01(Use standard twisted net cable,

model: CC-RS485-RS485-200U).

One-key easily configure and apply to batch setting.

Reboot Device

No Yes