User Manual

39
When updating successfully, the prompt will show below and then move back to the main
menu.
Test Mode Interface
Press or , move inverse cursor to 6Test Mode, then press
and enter into test mode interface below:
Password Setting Interface
Press or , move inverse cursor to 7Password , then press
and enter into test mode interface below:
Rated Value
Batt : 12.0 V
Load : 10.0A PV : 10.0A
Type : Seal Gel Flood
SAVE SUCCESS
Rated Value
Batt : 12.0 V
Load : 10.0A PV : 10.0A
Type : Seal Gel Flood
Save Cancel
Test Mode
Load:> ON OFF