User Manual
31
▼ Control parameters interface 5
Press continuously and the inverse cursor will move to the control
parameters interface. Press or to modify the following
control parameters.
The interface below will prompt only when the SOC is selected in the Batt Mng Mode.
Only when the inverse cursor moves to the last option, the modified parameters could be
saved. Press and the following picture appears.
Press or to choose save or cancel operation. When
modification canceled, the interface will go back main menu.
Parameter Set
Under V. Warn : 12.0V
Low V. Disc : 11.1V
Discharg Lmt : 10.8V
Save Cancel
Parameter Set
Equa.Time : 120Min
BoostTime : 120Min
Range from 0 to 180
Range from 10 to 180
Constant value
Range from 10 to 80
Parameter Set
Charge : 100%
Discharge : 30%