User Manual

30
Control parameters interface 3
Press continuously and the inverse cursor will move to the control
parameters interface. Press or to modify the following
control parameters. The value in this interface could be modified only when the battery
type is USER defined.
Control parameters interface 4
Press continuously and the inverse cursor will move to the control
parameters interface. Press or to modify the following
control parameters. The value in this interface could be modified only when the battery
type is USER defined.
Parameter Set
Boost V. Rect : 13.2V
Under V. Rect :12.2V
Under V. Warn:12.0V
Parameter Set
Low V. Rect : 12.6V
Low V. Disc : 11.1V
Discharg Lmt : 10.6V