User Manual
29
▼ Control parameters interface 1
Press continuously and the inverse cursor will move to the control
parameters interface. Press or to modify the following
control parameters. The value in this interface could be modified only when the battery
type is USER defined.
▼ Control parameters interface 2
Press continuously and the inverse cursor will move to the control
parameters interface. Press or to modify the following
control parameters. The value in this interface could be modified only when the battery
type is USER defined.
Parameter Set
Over Volt. Disc : 16.0V
Charg Lmt : 15.5V
Over Volt. Rect : 15.0V
Parameter Set
Equal Chrg : 14.6V
Boost Chrg : 14.4V
Float Chrg : 13.8V
Value is none
when GEL battery