User Manual

22
Log Info
There are two items of log record as shown blew.
Work Log Query
From 2012-01-01
To 2012-06-08
Total：79
No. 1/79
2012-01-01 00:00
Batt Volt 13.3V
Batt Cur 0.0A
PV Cur
0.0A
Discharging Cur
0.0A
<2>Alarm Log
<1>Work Log
<1>Work Log
<2>Alarm Log
Alarm Log Query
From 2012-01-01
To 2012-06-08
Total：10
No. 1/10
Batt OVD/Begin
2012-01-04 14:20
Para 17.20V
Work Log and Alarm Log could be browsed in this interface, the operation is
as follows:
Press to enter the Work Log or Alarm Log interface respectively when
the item is chosen in inverse. Press again to enter the Edit Mode. Use
or button to move the cursor between the time parameters and data bit.
Use button to modify the value and set the period of log for browse.
When the period is set, press to enter the corresponding details.
Log Number, time, the voltage and current of battery are included in every
work log item and are shown in the Work Log interface.
Warning event sequence number, warning event, start or end time, the fault
status and values are all included in every work log item and are shown in the
alarm Log interface.
 Clock Set
The interface of Clock Set is shown as follow:
Date and Time can be adjusted in this interface. Press button and input the
6 digit user password and then Date and Time could be adjusted. The format
of date is YYYY-MM-DD; the one of time is HH-MM-SS. When the set is over,
press button to save or press button to cancel. ―Save success!‖ will be
Clock Set
Jan-01-2014
17:12:28