User`s manual

Setting The Alarm

The meter can set up to 4 alarms, allowing you to control your test times according to your requirements.

1. Press inwards and hold the

wheel until turning the meter on.

2. Press inwards twice and the

display will show above.

3. Push the wheel down to

choose alarms 1-4. Press

inwards to confirm the setting.

4. Push the wheel up or down to

choose “On” and press inwards to

confirm the setting. The colon will

then flash. Push the wheel up or

down to adjust the time. (AM / PM,

24-hour clock) Press inwards to

confirm the setting.