User`s manual

42
Maintenance And Testing
Your meter needs little or no maintenance with normal use. It automatically
tests its own systems every time you turn it on and lets you know if
something is wrong. (See "Screen Messages" and what to do about them.)
To make sure the display is working properly, turn off the meter. Press and
hold “” to see the complete display. All the indicators should be clear and
look exactly like the picture to the left. If not, call the Customer Service Center
toll-free: 866-994-3345 (Eastern Time, Mon-Fri 9:00AM~5:00PM). During
non-service hours, please contact your healthcare provider
Cleaning Your Lancing Device
 To clean the lancing device, wipe with a soft cloth dampened with water and mild detergent.
DO NOT place the entire device under water.
 To disinfect the cap after cleaning. Place it in 70%-75% rubbing alcohol for 10 minutes at least once a
week. Allow the cap to air-dry after disinfecting.