User`s manual

27
Please make sure to apply blood when the blood drop appears on the display.
5. Gently squeeze and/or
massage your fingertip
until a round drop of blood
on your fingertip.
6. Touch the blood drop at the tip of the
transparent window of the test strip.
Do not put blood on top of the strip.
Be sure to get enough blood on the
strip’s reaction zone. Otherwise, an
inaccurate reading may result.
7. The meter starts to count down from 5
seconds.
9. Remove the test strip and the
meter turns off automatically.
10. Wash hands thoroughly with
soap and water after handling
the meter, lancing device and
test strips.
Apply blood to the edge of
the test strip.
Do not apply blood on top
of the test strip.
Be sure to get enough blood
on strip to make it to the
confirmation window.
Not enough blood on
strip to get a test result.