User`s manual

20
6. Touch the drop on the bottle
to cap the tip of the test
strip.
7. The meter starts to count
down from 5 seconds and
then will display result.
8. Do not remove the test strip
yet. Check if the reading
falls within the range printed
on the test strip bottle.
9. Remove the test strip and throw it
away after you have compared
the reading to the range printed
on the test strip bottle.
10. Please check if the result on the
display is the same as audible
result.
Be aware that there are Normal and High ranges listed on your test strip bottle. The Norma
and High refer to the three different control solutions that are available. Please be sure that
you are looking at the correct range.