Product Info

The indicator blinks when
charging. 0% -30% red light
flashing 30% -100% blue light
flashing The fully charged blue
light is steady on
When the charging case
is full,pull out the USB
charging cable.
The charging case closes
the cover to charge.
The red light blinks slowly
when the earphones battery
is low.
Put the earphone with low
battery into the charging
case, and the indicator of the
charging case flashes 6
seconds and then turn off.
When the charging case
is fully charged the blue
light always on.
0
9
40
尺寸：55*70mm；双面单色印刷；80G双铜风琴折
RT33
1 2
43
LED Indicator
Touch Key
2A2XD-RT33
Open the charging case ,The earphone indicator light flashes in blue light
is on for 1 second the earphone will automatically turn on and enter into
the pairing mode.
4
ON
ON
LED
lights up
LED
lights up
Hold on 3s
Mode 1
POWER ON
Mode 2
Press and hold the earphone’s touch key for 3 seconds, the blue indicator lights
will turn on for 1 second ,and the earphone automatically turn on.
POWER OFF
Put the earphones back in the charging case and close the case to turn
them off.
If the earphones are not in the charging case ,just press and hold the
touch key of any earbud for 10 seconds to turn them off.
5
OFF
OFF
L R
Mode 2
Mode 1
Hold on 10s
PAIRING
Put the left and right earphones into the charging case press the button 3
seconds in the charging case and the left and right earphones will pair
automatically. (the red and blue lights alternately flash)
Turn on your mobile phone's Bluetooth Search for "atune analog 12" and
connect it . The earphones will be paired with you device and sound will be
available throuth both channels.
6
LED
lights up
Voice prompt:pairing
“ Atune Analog 12 ”
Red
blue
Master-Slave is not fixed, the Master-Slave will be
automatically switched, and any earphone connected to the
mobile phone is the master earphone.
Supports Bluetooth devices connection and supports dual
-channel stereo high-fidelity music playback.
Supports TWS binaural phone call.
Support IOS and some of the android mobile phone battery
indicator
Charge the charging case if not using it for long time or
once every more than 3 months.
TWS headphones
Binaural Call
Bluetooth music
Power indicator
7
TOUCH CONTROL
1.Play/pause: One click on touch key on either earphones.
2.Previous song: Double click on the left earphone touch key.
Next song: Double click on the right earphonetouch key.
3.Volume +: Long press the touch panel on the right earphone.
Volume - : Long press the touch panel on the left earphone.
4.Answer the call: Click any earphone on the left or right.
Hang up the call: Press touch key on the left/right
earphone for 2 second to hand up the call.
Reject an incoming call: Press MFB Button on the left/right
earphone for 2 second to reject an the call.
5.
Activate SIRI: Three clicks on any one of the earphones
RESET
CHARGING COMPERTMENT INDICATOR
8
109 11 12 13
long press the
button 10 seconds
Put the earphone into the charging case ,long press the button of the
charging case for 10 seconds to clear the group pairing information
and restore factory settings.(The red light blinks for 3 seconds)
0%-30% Red light
30%-100% Blue light
LED Charging IndicatorUSB Charging Port
Model： RT33