User guide

Temperature Verification System USB – Single-channel — Operating manual

2 Product descript ion

2 Product description

2.1 Delivery package

2.1.1 Temperature Verification System USB – Single-channel

For Mastercycler nexus, Mastercycler pro, Mastercycler ep, Thermomixer and ThermoStat

1× measuring device

1× plug head line (connecting cable between measuring device and temperature sensor)

1× mains/power supply device

4× international plug adapter

1× operating manual

1× device case

2.1.2 Temperature sensor 96 Well

1× Temperature sensor 96 Well

1× certificate

2.1.3 Temperature sensor 384 Well

1× Temperature sensor 384 Well

1× silicone mat for the Temperature sensor 384 Well

4× spacers

1× bottle with parrafin oil (25 mL)

1× certificate

2.1.4 Temperature sensor 1,5 mL

1× Temperature sensor 1,5 mL

1× certificate

2.2 Features

2.2.1 Temperature Verification System USB – Single-channel

The Temperature Verification System USB – Single-channel enables simple and fast inspection

of the block temperature of the following Mastercycler products:

• Mastercycler nexus

• Mastercycler pro

• Mastercycler ep

The Temperature Verification System USB – Single-channel requires a minimum software

version in the control panel of the thermal cycler.

This table contains the minimum software versions required to use the Temperature Verification

System USB – Single-channel. If the device or CycleManager pro software has an older version,

install the software version listed below.

Hint!

• The term "validation" has been replaced by "verification" in these

instructions. The term "validation" is still used in older software versions.

• The term "calibration" has been replaced by "adjustment" in these

instructions. The term "calibration" is still used in older software versions.