User guide

Quick start
Mastercycler pro
English (EN)
71
9.6 Stopping and starting programs
9.7 Switching off the device
1. Mark the program.
2. Insert the sample tubes.
3. Close the heated lid.
4. Start the program.
5. With several connected cyclers: Mark
the cycler.
6. Confirm input.
7. You can use the status view to carry
out the following program commands
• Stop
• Abort
• Resume
1. Mark the Eppendorf or System node.
2. Press the Shutdown function key.
3. Switch off the Mastercycler pro at the
mains power switch.
Start
Enter