User guide

Product description

Mastercycler pro

English (EN)

Abb. 2-2: Terminal block

Fig. 2-2: Terminal block

Abb. 2-3: Control panel

Fig. 2-3: Control panel

Only devices meeting the IEC 950/EN 60950 (UL 1950) standards may be connected to the interfaces of the

Mastercycler pro and the control panel.

1 Parallel interface

Connection for printer.

2 Serial interface (RS 232)

Connection for Eppendorf temperature validation

system.

3 Control panel connection

4CAN out

Data outlet for connecting several

Mastercycler pro or Mastercycler ep.

5CAN in

Data inlet for connecting several

Mastercycler pro or Mastercycler ep.

6Term switch

Termination of CAN bus when networking several

Mastercycler pro or Mastercycler ep.

Lower position: ON. Upper position: OFF.

7 Address dial

Setting of device address when networking

several Mastercycler pro or Mastercycler ep.

1Display

2USB port1

For mouse, printer or storage medium.

3USB port2

For mouse, printer or storage medium.

4 MMC slot

For data exchange via a MultiMediaCard (MMC).

Printer RS 232 Control Panel CAN_out CAN_in Term Address

1 2 3 4 5 6 7