Owner manual

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
79
6.4.3 Defining irregular patterns
Irregular patterns can be defined for source labware and destination labware. If the pattern is irregular, it is
not completed.
Prerequisites
• Labware is positioned on the worktable.
• Create the application with the Transfer or Mix command (see p. 48).
1. Press the Pattern button.
Abb. 6-33: Edit Pattern window
Fig. 6-33: Edit Pattern window
The Edit Pattern window appears.
2. Check the Irregular pattern checkbox in the Source area.
3. Optional in the Destination area: check the Irregular pattern checkbox.
4. Define the pattern. Specify all source positions and destination positions.
If the pattern is irregular, the software does not complete the pattern automatically. The Complete
button is not active.