Owner manual

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
65
• Before the Dilute command: number of samples to be diluted. The number of dilution steps is defined by
the pattern.
• Before the Mix command: number of source positions in which liquid is mixed.
• With an eight-channel dispensing tool: for values between 1 – 8, 8 samples are processed. For values
9 - 16, 16 samples are processed, etc.
6.3.11 Temperature command
With the Temperature command you can temper the labware in a thermal module. The temperature control
stops when the epBlue is exited.
Abb. 6-19: Temperature window
Fig. 6-19: Temperature window
The command Temperature only is available for devices with thermal module.
Location drop-down list
Select a thermal module.
Activate the Temperature on
Activate the thermal module. Activated thermal
modules will be switched off when you uncheck
the checkbox.
Activate the Keep Temperature after application
run
Activate the thermal module for the period after
the application has exited. This function can be
used to cool samples after the application run has
been completed.
Temperature field
Set the set temperature of the thermal module.
0 °C – 110 °C range.