Owner manual

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
48
6.3.1 Sample transfer command
Various transfer commands are available to transfer liquids. All transfer commands are derived from the
Sample transfer command.
Abb. 6-7: Principle of the Sample transfer command
Fig. 6-7: Principle of the Sample transfer command
The Sample transfer command is used to transfer liquids from various source positions to several
destination positions. The number of samples that will be aspirated from the source labware depends on
the Number of samples (see p. 64) command.
Vacuum
epMotion with
vacuum unit.
Additional commands
BAR