Owner manual

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
47
6.2.9 Checking an application
1. Click on the symbol in the menu bar.
2. Select the Check command function.
The application is checked.
Example: Pipette tips without a filter are placed on the epMotion worktable. In the application, pipette
tips with filter were selected. The screen displays an error message.
6.3 Commands
A procedure is a sequence of commands that epMotion executes during an application run. Commands are
executed one after the other and independent of each other. Each command has a specific set of
parameters.
The software does not include a command for taking up pipette tips. The user defines which pipette tips
will be used in a command. The user positions the corresponding pipette tips on the worktable.
The user defines the dispensing tool for each command. Tools are taken up according to the command
parameters.
The parameter set displayed in the software depends on the equipment of your epMotion.
Transfer commands
Sample transfer Reagent transfer Dilute Pool Pool one destination
Additional commands
Mix Thermomixer
epMotion with
thermomixer
Magnetic separation
epMotion with
magnetic finger
module
Temperature
epMotion with
thermal module
Transport
epMotion 5075
epMotion 5073
Exchange
epMotion 5070
Wait User intervention Comment Number of samples