Owner manual

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
46
Prerequisites
• The application is open (see p. 25).
• Labware is positioned on the worktable (see p. 25).
• The Procedure window is open.
6.2.8.1 Inserting a command
1. Select a command from the Commands column.
2. Drag the command to the Procedure column.
3. In order to insert a command at the end of the application, double-click on the selected command in the
column Commands.
6.2.8.2 Copying commands
 Select a command from the Procedure column.
 Click on the symbol in the menu bar.
 Alternatively, open the context menu with the right mouse button and select Copy.
6.2.8.3 Inserting a copied command
1. Copy the command.
2. Select the position in the Procedure column where you would like to insert the copied command.
3. Select the Paste command in the context menu.
The copied command is inserted behind the selected position.
6.2.8.4 Changing the command sequence
 Select a command in the Procedure column.
 Drag the command to the desired position in the procedure.
6.2.8.5 Deleting commands
 Select a command in the Procedure column.
 Delete the command using the symbol in the menu bar or via the context menu.
6.2.8.6 Changing command parameters
1. Select a command in the Procedure column.
The parameters of the selected command are shown in the Options area.
2. Set the parameters to suit your requirements.