Owner manual

epBlue Application Runner - Carrying out the application

epBlue™ with MultiCon

English (EN)

4.3 Starting the application

Prerequisites

• The labware is positioned on the epMotion worktable.

• epMotion is ready for operation.

• The application run was prepared. (see p. 26)

 Click on the Run button.

The application starts.

4.4 Controlling the application

Abb. 4-9: Running application

Fig. 4-9: Running application

 Control the application with the buttons from the Control area.

Carrying out the application. The epMotion executes the

application until the end.

Executing the application step-by-step. The epMotion

executes the next step and then stops.

Pause. The application stops, but it will not be aborted.

Aborting the application. If you have stopped the

application using the button, the button is now

active.

Procedure area

Commands. The active command is

highlighted blue.

Worktable area

Worktable.

Remaining Runtime area

Status of the application/runtime of the

application/total time for the application.

Log area

Log.