Owner manual

epBlue Application Runner - Carrying out the application

epBlue™ with MultiCon

English (EN)

5. Confirm your entry with the OK button.

6. Press the Next button to enter the ID for the next labware.

7. When all IDs have been entered, the application starts.

4.2.6.2 Reading the IDs with an entry list

Prerequisites

• Labware ID tracking is activated.

• The Entry list option is activated for the labware.

1. Press the Next button.

You are prompted to enter the IDs for the labware. The labware is marked with a border.

2. Press the Select ID list button.

The Select ID list window appears.

By default, the window shows all compatible entry lists.

3. Import the entry list, if required (see p. 115)

4. Select the entry list to be imported.

5. Press the OK button.

6. Enter the ID for the selected position.

epBlue compares the entered ID with the ID of the entry list.

7. If the ID does not correspond to the ID of the entry list, an error message appears. Correct the

corresponding ID.

8. When all IDs have been entered, the application starts.