Owner manual

epBlue Application Runner - Carrying out the application

epBlue™ with MultiCon

English (EN)

4.2.2 Entering the sample quantity

Abb. 4-3: Process control window

Fig. 4-3: Process control window

The window Process control appears if the sample quantity in the application is variable.

1. Enter the sample quantity for the current run.

2. Press the OK button.

4.2.3 Setting the HEPA air filter and the UV lamp

Abb. 4-4: Setting the parameters for the HEPA air filter and the UV lamp

Fig. 4-4: Setting the parameters for the HEPA air filter and the UV lamp

If your epMotion is equipped with a HEPA air filter and UV lamp, you can define the settings for the HEPA

air filter and the UV lamp.

 Activate or deactivate the HEPA air filter.

 Define whether a decontamination is to be carried out before the application.

The worktable may only be decontaminated if no labware or tools are present on the worktable.