Owner manual

epBlue settings - Checking components and making the basic settings
epBlue™ with MultiCon
English (EN)
122
11.5 Gripper
The Gripper function can be used to open and close the gripper. Labware can be removed from the gripper
if necessary.
Abb. 11-4: Gripper function
Fig. 11-4: Gripper function
11.5.1 Moving the gripper arms
Prerequisites
• The gripper is located in the tool holder.
1. To move the gripper arms, enter a value in the Gripper distance field. The value must be approx. 20%
larger than the value in the Distance field.
2. Confirm your entry with the Set button.
The gripper can now be moved.
Distance field
Distance of gripper arms
Gripper distance (µm) field
New distance of gripper arms
Set button
Confirm new distance of gripper arms
Export field
Exports data