Owner manual

epBlue Labware Editor - Creating and managing labware
epBlue™ with MultiCon
English (EN)
106
8.5.4 PCR plates
Labware types in epBlue: Plates > PCR.
8.5.5 Filter plates
Plates in the labware library can be found under Plates.
8.5.6 Racks
Labware types in epBlue: Racks with Tubes
The racks must be equipped with vessels before they are used in an application.
8.5.7 Rack 96
Labware types in epBlue: Racks with Tubes > Racks > Rack96_1_5 - 2_0
When editing the epBlue worktable, position Rack 96 at one rear location and one front location (e.g., A2
and B2). For both locations, define the same detection version for the optical sensor. Ensure that the same
entries are used for both Rack 96 locations.
8.5.8 Rack LC
Labware types in epBlue: PlatesTube Plates 96
8.5.9 ReservoirRack
Labware types in epBlue: ReservoirRacks with modules
Only irregular patterns may be set if the Reservoir Rack is equipped with different Reservoir Rack modules
and reservoirs.
Regular patterns may be set if the Reservoir Rack is equipped with identical Reservoir Rack modules or
identical reservoirs.
For each reservoir and each ReservoirRack module, the Detect volumes function of the optical sensor can be
activated.
Labware Labware types
PCR plates with 96 wells PCR 96
PCR plates with 384 wells PCR 384
Labware Labware types
Filter plates with 96 wells Filter Plates 96
Filter plates with 384 wells Filter Plates 384