Owner manual

epBlue Labware Editor - Creating and managing labware
epBlue™ with MultiCon
English (EN)
102
8.3.3 Equipping the racks, thermoracks and Reservoir Rack modules with individual
vessels
Abb. 8-11: Creating a labware combination
Fig. 8-11: Creating a labware combination
Proceed as follows:
Prerequisites
• The labware was created with the Racks and Tubes or Module Rack + Tubes option.
• The labware is open.
1. Select a rack in the Racks column.
2. Select matching vessels in the Tubes column.
Racks column
Racks and Reservoir Rack modules. If you have
selected a rack, only vessels that can be
combined with the rack will be shown.
Tubes column
Individual vessels. If you have selected an
individual vessel, only racks that can be
combined with an individual vessel will be shown.
Properties column
Information on the selected labware.
Reset button
Undo changes. Return to the status before the
last save.
Clear button
Delete the selected individual vessel, rack,
ReservoirRack module.
Symbol
Close the labware.
Symbol
Save the labware combination as new labware.
Symbol
Save your changes.