Manual

22
Operation
Easypet
®
3
English (EN)
5.6 Dispensing liquid
5.6.1 Flow-out
A valve will be opened during flow-out. The liquid drains from the pipette as a result of
atmospheric pressure.
5.6.2 Blow-out
During blow out, the liquid will be dispensed using the pump.
Observe the type of pipette used.
After liquid dispensing, hold class AS quick-drain pipettes on the tube inner wall
for 5 seconds to allow the liquid to drain.
Abb. 5-6:Allowing liquid to flow-out
Fig. 5-6: Allowing liquid to flow-out
1. Hold the pipette vertically and place it on
the tube inner wall.
2. Press the dispensing button lightly.
≤ 4 mm