Design) User guide

Concentrator plus/Vacufuge® plus — Operating manual

Connecting vacuum pumps up to 350 W

Requirement

• Power consumption of the vacuum pump: max. 350 W or electrical connection value max.

400 VA.

• Special plug for control and power supply of the vacuum pump (see Accessories on p. 43)

• 1 connecting hose (length: max. 50 cm, inner diameter: 8 mm, chemical resistant and suitable

for vacuum applications).

Abb. 2: Special plug for control a nd power supply of a vacuum pump with a power consump tion of up to 350 W.

Fig. 2: Special plug for control and power supply of a vacuum pump with a power

consumption of up to 350 W.

Abb. 3: Connection of the power consumption for a vacuum pump up to 350 W to the Concentra tor plus basic device.

Fig. 3: Connection of the power consumption for a vacuum pump up to 350 W to the

Concentrator plus basic device.

1. Disconnect the basic device 1 and vacuum pump 5 from the mains power supply.

2. Insert the mains cable of the vacuum pump 6 into the special plug 7.

3. Insert the special plug into the provided socket 8 at the rear of the basic device (connected

mains voltage!).

4. Connect the inlet of the vacuum pump 4 to the pump connection 2 at the rear of the basic

device via a connecting hose 3.

5. Connect the basic device to the mains power supply 9.

4 5

6789

Operating manual