Manual

Installation

Eppendorf BioSpectrometer

kinetic

English (EN)

4.5 Connecting PC or USB stick for data export

You can connect a FAT 32-formatted USB stick to the USB port 4 (see Main illustration on p. 9).

Alternatively, you can connect the device for the data export directly to a PC by using a USB cable:

Prerequisites

• PC with Windows, version XP, SP2 or higher version.

• USB cable with a type A and type B plug each.

 Connect the device to the PC by using the USB cable on the USB port 8 (see Main illustration on p. 9).

5 (OFF) Baud

6 (ON) Rate

7 (ON) Select

8 (ON) = 9600 bps

• You do not need any special PC software for the data transmission: the transferred data

packets are recognized by the PC like a USB stick as a removable medium. For viewing the

data, you only need to open the registered data packet.

• The transmission of data to the USB stick or to the PC is started after completing the series

of measurement in the print & export (see Print & export on p. 55) method step.

DIP SW-3 Meaning