Owner's manual

Functions

Eppendorf BioSpectrometer

fluorescence

English (EN)

When programming a method of the Dye labels or Proteins direct UV method groups, you can access the

entries in General Method Parameter:

Tab. 7-2: Parameter in General Method Parameter

 To edit a parameter group, use and to

select the parameter which you would like to

edit.

 Confirm with enter.

Softkeys

• [OK]: Save entry and return to the parameter group selection.

• [Cancel]: Return to the parameter group selection without making any changes.

Select the name of the dye to import the

corresponding parameter group into the method

program. By using the "edit" selection of the

"Nucleic acid" parameter, you also can get directly

to the General Method Parameter function and

view and edit the parameters.

Parameter Explanation

Proteins These parameters are loaded into the method parameters when a protein

is selected during the programming of a method in the Dye labels and

Proteins direct UV groups.

• Protein name

•Factor

•A

0.1%

•Ext.coeff.

•Molecular mass

In order to define a factor for calculating the concentration on the basis of

the absorbance, enter the following data in addition to the name and

wavelength:

Factor or A

0.1%

or absorbance coefficient and molar mass.

Nucleic acids These parameters are loaded into the method parameters when a nucleic

acid is selected during the programming of a method in the Dye labels

group.