Manual

M1353-0050  Excella

E-25/E25R Classic Incubator Shakers Operating Manual

4.1.1 LED Display

The digital display on the control panel is a three-digit LED DISPLAY. During

normal shaker operation, the display will indicate:

 Shaker status (On/Off)

 Shaking speed

 Chamber temperature

 Setpoints

 Hours remaining (in a timed run)

 Lid open (“LID”)

4.1.2 User Interface Keys

As you can see in Figure 2a, the keypad has four user interface keys:

START/STOP, ,

 and SELECT. This is how they are used:

 START/STOP

This key is used to start or stop the shaker. It will

also activate or stop the timer when a timed run is

desired.

 (UP), (DOWN)

These keys are used to adjust the setpoint of a

displayed parameter up or down. They also allow

the user to enter the SET MODE for setpoint

changes.

 SELECT

This key is used to change the displayed parameter.

4.1.3 Status Indicators

Four status indicator lights are located to the left of the LED DISPLAY. They are:

 SET

Indicates that the shaker is in the SET MODE, when setpoints are

being displayed and can be altered. This is activated by the

SELECT key or by pressing the  (UP) or  (DOWN) KEY.



POWER

Illuminates and blinks during power up or if power is

interrupted during a run. Press the SELECT key and change to

another function to turn off this indicator.

…continued…