User Manual

Overview
Eppendorf
®
PlateReader AF2200
English (EN)
34
View Mode: Select between Matrix and List.
•If Matrix is selected, the data alignment corresponds to a microplate; times per well cannot be
displayed. Not relevant for kinetic result presentation.
•If List is selected, choose between: Align, Rotation, Display Times.
Show: Select between All and Measured.
•If All is selected, the whole plate geometry, including all possible rows and columns, is displayed.
•If Measured is selected, only the results of the measured wells are displayed.
Align: Select between A1A2 or A1B1.
•If A1A2 is selected, the results are arranged in rows (of the microplate).
•If A1B1 is selected, the results are arranged in columns (of the microplate).
Rotation: Select between Columnwise or Rowwise.
•If Columnwise is selected, the results are displayed in a column (in the Excel sheet).
•If Rowwise is selected, the results are displayed in a row (in the Excel sheet).
Display Times: Select between No time or Time per well.
If No Time is selected, only the values are displayed.
If Time per well is selected, a timespan for each value is displayed.
Data Presentation - Kinetic
Rotation: Select between Columnwise or Rowwise.
If Columnwise is selected, the results are displayed in a column (in the Excel sheet). •
If Rowwise is selected, the results are displayed in a row (in the Excel sheet).
Align: Select between A1A2 and A1B1.
If A1A2 is selected, the results are arranged in rows (of the microplate).
If A1B1 is selected, the results are arranged in columns (of the microplate).
Display Times: Select between Time per cycle and Time per well.
If Time per cycle
is selected, a timespan per cycle is displayed.
If Ti
me per well is selected, a timespan for every well is displayed.