User Manual

Overview

Eppendorf

PlateReader AF2200

English (EN)

4.5.5 Settings Menu

Heating This command is used to set the target temperature of the

instrument manually.

• Select or enter the Target temperature and click Set and On to

start instrument heating.

•Click the Read button to display the current temperature inside

the instrument or click the Auto check box to have it read

automatically.

•Click Off to stop heating.

• Click the down button to display the heating graph and

click the up button to hide it.

• Click the close button to exit the Heating dialog box.

Properties Select Properties to set a new alias name for the instrument.

Enter a new name in the New Alias field and click Set Alias to

confirm.

These settings take effect after restarting the software.

Filter Definitions

Measurement Mode Select the appropriate filter position and enter the new wavelength,

bandwidth, and measurement mode for each new filter.

Choose from the dropdown list:

• FI for fluorescence intensity,

• ABS for absorbance measurements, and

• Empty for filter-free positions.

Wavelength Enter the filter wavelength.

For fluorescence intensity measurements, set the filter wavelength

within the allowed range of the instrument.

Absorbance filters are definable between 230 and 1000 nm

(Excitation only).

Bandwidth Enter the bandwidth (nm) of the filter.

Description This field can be used for individual user remarks about the filter,

e.g. filter name, application, etc.