User Manual

Overview
Eppendorf
®
PlateReader AF2200
English (EN)
22
User Intervention
The User Intervention program element informs the operator of the instrument to execute a definite action
during the workflow at a certain time.
If for example the Move Plate program element is used to move the plate out to perform a certain action,
then the entered text should inform the operator to perform these actions. A dialog box shows the message
and the measurement process stops until OK is clicked.
If the plate should be moved in after pipetting for example, then the text Move Plate In informs the operator
to move the plate in after pipetting to continue the workflow.
Wait for Temperature
Use the program element Wait for Temperature to define a valid temperature range for the assay.
This is typically used after a Temperature program element
Wait Time
Use the Wait Time program element to define a certain waiting period before the next step within a
workflow is executed.
In the Wait time field enter the required time.
1. Enter the respective parameters:
Timer Enter the Wait time (hh:mm:ss)
Options Ignore wait at last kinetic cycle: When the program step Wait Time is
the last action within a kinetic run, the wait time will be ignored in
the last cycle.