Instruction Manual

10
New Brunswick Operating Manual
• Hours remaining (timed run)
1.3.2 User Interface Keys
• START/STOP
This key is used to start or stop the shaking
motion. It will also activate or stop the timer when
timed run is desired.
•
σ, τ
These keys are used to adjust the setpoint of a
displayed parameter up or down. They also allow
the user to enter the Set mode for setpoint changes.
• SELECT
This key is used to change the displayed
parameter.
1.3.3 Status Indicators
• MAINT
Lights after 10,000 hours of use, to indicate need
for routine maintenance. Accumulated running
time is internally monitored and may be displayed
as a guideline.
• SET
Lights to indicate that the shaker is in the Set
mode, setpoints are being displayed, and setpoints
can be altered.
• TIME
Lights to indicate that the timer is in operation.
Innova shakers can be programmed to run for a
preset time from 0.1 hour to 99.9 hours. The timer
can be disengaged without stopping an ongoing
run.
• MUTE
Indicates the status of the audible alarm. When the
MUTE indicator is illuminated, the audible alarm
device is disabled.