Manual

Operation

New Brunswick Digital Platform Shaker Innova® 2100/2150

English (EN)

5.8 Recorder adaptation

To record speed or temperature, an auxiliary recorder (not supplied, but available from Eppendorf) can be

used. The recorder should have the following capabilities:

Abb. 5-1: Recorder connector as seen from the rear of the unit

Fig. 5-1: Recorder connector as seen from the

rear of the unit

• For speed, each channel should have signal

conditioning that accepts 0 – 5 V input.

• For temperature, each chanel should have a

signal conditioning that accepts 0 – 5 V input

• A mating connector is required on the recorder

cable (not supplied, but available from

Eppendorf). This is a 9-pin male D subminiature

connector, AMP Amplimite HDP-20 series or

equivalent.

Pin number Signal name Scale

6 Speed 1 V = 100 rpm

2 Ground

7 Temperature 1 V = 20 °C

3 Ground