ck nual Digital Platform Shaker Innova® 2100/2150 gEN) manual New Brunswick Innova® 2100/2150 Shaker Operating manual
Copyright © 2014 Eppendorf AG, Germany. No part of this publication may be reproduced without the prior permission of the copyright owner. Eppendorf® and the Eppendorf logo are registered trademarks of Eppendorf AG, Germany. New Brunswick™ and the New Brunswick™ logo are trademarks of Eppendorf AG, Germany. Innova® is a registered trademark of Eppendorf, Inc., USA. Trademarks are not marked in all cases with ™ or ® in this manual.
Table of contents New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Table of contents 1 Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 Using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Danger symbols and danger levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of contents New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 5.5 5.6 5.7 5.8 5.4.1 Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 5.4.2 Canceling the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Alarm functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating instructions New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 1 1.1 Operating instructions Using this manual Carefully read this operating manual before using the device for the first time. Also observe the operating manual enclosed with the accessories. The operating manual should be considered as part of the product and stored in a location that is easily accessible. When passing the device on to third parties, be sure to include this operating manual.
Operating instructions New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 1.3 Symbols used Example Meaning You are requested to perform an action. 1. 2. Perform these actions in the sequence described. • List. References useful information.
Safety New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 2 2.1 Safety User profile CAUTION! This equipment must be operated as described in this manual. If operational guidelines are not followed, equipment damage and personal injury can occur. Please read the entire Operating Manual before attempting to use this unit. Do not use this equipment in a hazardous atmosphere or with hazardous materials for which the equipment was not designed.
Safety New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN)
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 3 3.1 Product description Main Illustration Abb. 3-1: Innova 2100/2150 front view 2 3 RPM MAINT SET TIME MUTE 1 Fig. 3-1: START STOP HRS °C * SELECT Innova 2100/2150 front view 1 Temperature/monitor RTD probe and bracket (not shown) Optional 3 Control panel 2 Platform Unless otherwise indicated, all drawings represent both Innova 2100 and Innova 2150 models.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Abb. 3-2: Innova 2100/2150 rear view 1 8 Fig. 3-2: 2 3 7 4 6 5 Innova 2100/2150 rear view 1 RTD connectos Optional 2 Fuse Control circuit 3 On/Off switch 5 Universal power module 6 Power cord connection 7 Chart recorder connection Optional 8 Cover plate 4 Voltage selector 3.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 3.2.2 Alarms The Innova 2100/2150 is equipped with audible and visible alarms that alert the user to the following conditions: • The end of a timed run • Deviation of shaking speed outside the tolerance limits 3.2.3 Platforms and accessories To accommodate customer needs, a wide variety of platforms can be used with the Innova 2100/2150. Dedicated platforms are available for a variety of flask sizes.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Abb. 3-3: Control panel 1 2 3 MAINT RPM SET HRS TIME °C MUTE * START STOP SELECT 4 Fig. 3-3: Control panel 1 Status indicators 3 Function indicators 2 LED display 4 Keypad 3.4.1 LED display The Innova control panel has a 3-digit LED display.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 3.4.2 Keypad START/STOP Keys SELECT 3.4.3 MAINT SET • Starts and stops the drive • Activates or stops timer when timed run is desired • Adjusts the setpoint of a displayed parameter up or down • Used to enter the SET mode for setpoint changes • Changes the displayed parameter • Temperature (°C) cannot be selected unless the temperature/remote monitoring option is installed.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 3.6 Optional features 3.6.1 Temperature/monitor option A Temperature/Monitor Option is available for installation on the Innova 2100/2150. The ambient temperature or the temperature of the liquid in any vessel can be measured using the RTD electronics-based measuring device supplied with this option. When the option is installed, the LED will display the measured temperatures in 0.1 °C increments.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 3.7.3 Triple eccentric drive The drive mechanism (see following Figure) uses a counterweight system to stabilize the rotary motion produced during operation. When the work load moves in one direction, opposing forces are generated to stabilize the shaker. This action will help eliminate the problem of “walking” which may occur with less precisely balanced instruments.
Product description New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) • Contains firmware for shaker control as well as recognition of an expansion connector for option modules; • Provides an operator interface via displays, audible alarm, and connection to the keypad module (keypad buttons and display graphics). The optional Temperature Monitor module is designed to “piggyback” onto the main board via an expansion connector.
Installation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 4 4.1 Installation Unpacking Upon unpacking the unit, inspect it carefully for any apparent damage that may have occurred during transit. Immediately report any damage to the carrier and to the Eppendorf Service Department. Do not discard the crate or packing material. VERY IMPORTANT: There are 2 small plastic straps that hold the bearing housing in place for shipping. Be sure to remove these 2 straps before operation. 4.
Installation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) The required surface area required for operation is: Model Width Depth Innova 2100 without capacity upgrade 56 cm (22 in) 61 cm (24 in) Innova 2150 and 2100 with capacity upgrade 68.5 cm (27 in) 61 cm (24 in) WARNING! Do not position the equipment so that it is difficult to operate the disconnecting device (main plug).
Installation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 4.5 Install the platform CAUTION! Risk of damage to the device! Never run the shaker without a properly installed platform. A platform (purchased separately) must be installed on the unit prior to use. 1. Set the power switch in the Off position. 2. Using the 7/32 inch allen key provided, remove the four Allen head platform screws installed in the subplatform of the bearing housing (under the shaker).
Installation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) All clamps are shipped complete with hardware. Clamps for 2 – 6 L flasks are shipped with an additional girdle to keep the flasks in place. To install 2 – 6 L clamps: Abb. 4-1: Double girdle clamp 1 4 Fig. 4-1: 2 1. Place each clamp on the platform, secure the clamp in place with the correct type and number of screws. 2.
Operation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 5 5.1 Operation Getting started To start the instrument, turn the ON/OFF switch on the back of shaker to the ON position. If the shaker is running, the LED display will track the speed as it accelerates to the last entered setpoint. The shaking action may be stopped or started by pressing the START/STOP key on the control panel. 5.2 Continuous/unlimited run 1. If the LED displays OFF, press the START/STOP key. 2.
Operation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) The TIME indicator will illuminate and remain on for the duration of the run. At the end of the timed run: • The display will read OFF • The time indicator will flash • The audible alarm will sound The setpoint may be changed during a run without stopping the shaker by following steps 1 and 2 above. 5.4.2 Canceling the timer To cancel the timer without stopping the shaker: 1. Press the SELECT key to illuminate HRS. 2.
Operation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) The MUTE indicator will extinguish to advise that the audible alarm is active. The shaker may be stopped or started by pressing the START/STOP key. When starting, the unit will automatically return to the last function and speed setting. The audible alarm will sound until the speed is within 5 rpm of the setpoint. The alarm will not sound while the shaker is accelerating immediately following turning on the power. 5.
Operation New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 5.8 Recorder adaptation To record speed or temperature, an auxiliary recorder (not supplied, but available from Eppendorf) can be used. The recorder should have the following capabilities: Abb. 5-1: Recorder connector as seen from the rear of the unit 4 5 8 9 Fig.
Maintenance New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 6 Maintenance WARNING! Before performing any service, turn off the power, using the ON/OFF switch on the rear panel, and disconnect the power cord. 6.1 Routine maintenance No routine maintenance is required for the Innova 2100/2150 Shaker. The MAINT indicator light illuminates at the end of 10000 hours of use. At that time, contact your local Eppendorf Service Engineer, or call the Eppendorf Service Department.
Maintenance New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) To replace fuses (without changing the fusing arrangement): 1. Disconnect the unit from the power source. 2. Using a small screwdriver, remove the cover/fuse block located on the rear of the unit. 3. Remove the old fuse. 4. Insert a new one of the same type. 5. Replace the cover/fuse block into the power module. Spare fuses are supplied with the unit. Abb. 6-1: Power entry module (2000/2050) 1 2 5 Fig.
Technical data New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 7 7.1 Technical data Specifications 7.1.1 Innova 2100 Tab. 7-1: Shaking Speed 25 – 500 rpm Control accuracy ±1 rpm Indication 3-Digit LED, in 1 rpm increments Stroke/Orbit 1.9 cm (¾ in) Setpoint and control Digital adjustment with PI microprocessor control and instantaneous visual feedback. Operating ambient 0 – 60 °C, 90 % humidity, non-condensing. Up to 2000 m. Timer Programmable shaking periods from 0.
Technical data New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) At 25 – 400 rpm, the unit will perform to specifications with up to ±10 % line voltage fluctuation. To attain speed accuracy at 401 – 500, the line voltage cannot be lower than 5 % of the rated voltage. The Innova 2100 can be upgraded to a larger capacity platform with a kit that converts this shaker to an Innova 2150. This kit can be installed in the field. 7.1.2 Innova 2150 Tab.
Technical data New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Remote monitoring 0 – 5 V chart recorder output for speed: 1 V per 100 rpm. Accuracy ±25 mV. (optional) Temperature monitor (optional) RTD digital temperature monitor displays individual flask or ambient temperature in 0.1 °C increments. Chart recorder output provided. At 25 – 400 rpm, the unit will perform to specifications with up to ±10 % line voltage fluctuation.
Technical data New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN)
Ordering information New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 8 8.1 Ordering information Service parts 2100/2150 Part number Description Quantity P0380-3710 5×20 mm / 0.16 A / 250 V / Time Delay - Fuse 1 P0380-3530 3AG Fuse / 1.
Ordering information New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Tab.
Ordering information New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Tab. 8-3: 10 – 500 mL clamp hardware application chart Description Part number Qty. Application 10-24 x 5/8 (15.87 mm) flat Phillips (+) head screw S2116-3101 1 19.05 mm (3/4 in) thick wood platform 10-24 x 5/16 (7.9 mm) flat Phillips (+) head screw S2116-3051 1 7.9 mm (5/16 in) thick aluminum, phenolic and stainless steel platforms 10-32 x 5/16 (7.
Ordering information New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 8.5.3 Capacity upgrade option With this kit (M1194-9926), an Innova 2100, which has an 46 × 46 cm (18 × 18 in) platform, can be converted to an Innova 2150, with an 46 × 61 cm (18 × 24 in) platforms platform. The kit consists of counterweighting, hardware, and outrigger feet. Platforms must be purchased separately. This option must be installed by a qualified service engineer.
Transport, storage and disposal New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) 9 9.1 Transport, storage and disposal Disposal In case the product is to be disposed of, the relevant legal regulations are to be observed.
Transport, storage and disposal New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN)
Certifications New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Certifications Declaration of Conformity The product named below fulfills the requirements of directives and standards listed. In the case of unauthorized modifications to the product or an unintended use this declaration becomes invalid.
Certifications New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN)
Index New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Index K Keypad .................................................................. 13 A Accessories............................................................11 M Alarm ...................................................11, 22, 22, 22 Main illustration...................................................... 9 Mains/power ......................................................... 11 B Bearings .....................................
Index New Brunswick Digital Platform Shaker Innova® 2100/2150 English (EN) Symbols used ..........................................................6 T Temperature monitor ............................................23 Timer ...............................................................21, 22 U Universal power module .......................................11 Unpacking .............................................................17 Using this manual....................................................
Evaluate your manual Give us your feedback. www.eppendorf.com/manualfeedback Your local distributor: www.eppendorf.com/contact Eppendorf AG · 22331 Hamburg · Germany eppendorf@eppendorf.com · www.eppendorf.
