User`s manual

- 1 -

TABLE OF CONTENTS

WHAT'S IN THE MANUAL.................................................................... 5

Quick Reference ............................................................................................... 5

About This Manual ........................................................................................... 5

1 INTRODUCTION................................................................................ 6

1.1 TO DIFFERENT USERS ............................................................................. 6

FIRST-TIME DIY SYSTEM BUILDER ....................................................... 6

EXPERIENCED DIY USER .................................................................... 6

SYSTEM INTEGRATOR .......................................................................... 6

1.2 ITEM CHECKLIST ....................................................................................... 7

2 FEATURES ........................................................................................ 8

2.1 SPECIFICATIONS ....................................................................................... 8

3 HARDWARE INSTALLATION .......................................................... 11

3.1 STEP BY STEP INSTALLATION................................................................11

Accessories of FB61 .............................................................................11

STEP 1 CPU Installation ........................................................................ 12

STEP 2 Set Jumper............................................................................... 13

STEP 3 Install DDR SDRAM System Memory ........................................ 13

STEP 4 Install Internal Peripherals in System Case ................................ 14

STEP 5 Mount the Mainboard on the Computer Chassis ........................ 15

STEP 6 Connect Front Panel Switches/LEDs/USB/MIC/Line-out/Line-in/

1394 ......................................................................................... 16

STEP 7 Connect IDE, Floppy, and Serial ATA Disk Drives ..................... 17

STEP 8 Connect Other Internal Peripherals............................................ 18

STEP 9 Connect the Power Supply........................................................ 20

STEP 10 Install Add-on Cards in Expansion Slots .................................. 20

STEP 11 Connect External Peripherals to Back-Panel ........................... 21

STEP 12 First Time System Boot Up ..................................................... 22