User`s manual

- 35 -
Wireless Keyboard and Mouse Connector (JP6)
Port JP6 can be used to connect wireless keyboard and mouse device.
E2 CPU, System and Chipset Fan Connectors - FAN1/2/3
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU (FAN1), System (FAN2) or Chipset (FAN3) cooling fans.
Audio CD_IN Connector (JP11) (Black)
Port JP11 is used to attach an audio connector cable from the CD-ROM drive.
SENSE
GND +12V
1
E3
4
3
2
1
CD_IN Left
CD_IN Right
GND
E4
12 10 8 6 4 2
11 9 7 5 3 1
FAN3
1
1
1
FAN2
FAN1
JP6
Wireless KB/MS
1
JP11
CD-IN
1
1
Ground
FAN_CTRL
FAN_SEN
+12V
Pin Assignments:
1=VCC 2=VCC
3=GND 4=KEY
5=MSCLK 6=MS_CK
7=MSDATA 8=MS_DK
9=KBCLK 10=KB_CK
11=KBDATA 12=KB_DT
Note: Both cable wiring and
type of plug may vary, which
depend on the fan maker. Keep
in mind that the red wire should
always be connected to the
+12V header and the black wire
to the ground (GND) header.