User`s manual

Remedy: N/A

EMI Interference:

Crystal: 32.768 KHz (X1)/ 14.318 MHz (X2)/ 25 MHz (X4)/ 24.576 MHz(X6)

Clock Generator: U5

(D) Supported Host Peripherals:

(E) Notices for Assembling Computers:

1. Cases should be made of iron or other metal that has good electric conductivity.

2. Cylinders in a case should be made of metal, and as having a mainboard mounted

in a case, make sure screws are all utilized and fastened on a mainboard.

3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.

4. Cables should appropriately be arranged and fixed in a case. Follow instructions:

Ø Leave IDE cables not crossed upon CPU and SDRAM;

Ø Leave power cables minimum in length, and not crossed upon a mainboard;

Ø Leave CPU fan cables minimum in length, and not near CPU;

Ø Leave cables on panels and other spare cables tied in a computer case.

5. Make sure an EMI shielding attached to a case has properly been installed.

6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.

7. Make sure a case is closely in contact with EMI connected points.

8. Make sure there is no cleft in a case which is not deformed.

9. Make sure a PCI or AGP door is bound to a case.

10. Make sure cables of other devices (fans or some others) are fixed in a case.

Host Peripheral Product Name Model Name

#1 Case FB61

#2 Power Supply (250w) PC40N250EV

#3 IBM HDD (30.7 GB) 91024UB

#4 MITSUMI FDD D353M

#5 SONY VCD Player CDU4811

#6 POWER CABLE Detachable and Shielded

#7 AGP CARD Winfast Geforce 2 MX